Browsing by Author "Hazourli, Sabir"
Now showing 1 - 5 of 5
- Results Per Page
- Sort Options
Item Efficiency evaluation of electrocoagulation process for reducing the environmental impact of olive mill wastewater(American Scientific Publishers, 2017) Ziati, Mounir; Cherifi, Ouiza; Didouche, Yasmina-Fadila; Hazourli, SabirItem Experimental investigation of activated carbon prepared from date stones adsorbent electrode for electrosorption of lead from aqueous solution(Elsevier, 2018) Ziati, Mounir; Hazourli, SabirItem Reduction of turbidity and chromium content of tannery wastewater by electrocoagulation process(Water Environment Federation, 2018) Ziati, Mounir; Khemmari, Fariza; Aitbara, Adel; Hazourli, SabirThe present study is carried out to remove chromium and turbidity from tannery wastewater using the electrocoagulation process with aluminum electrodes. This experimental study is carried out using a batch system. The applied pilot comprises a reactor containing two parallel metal electrodes (Al). The latter are connected as monopolar, and a different potential is applied between them. Several working parameters, such as applied potential difference, electrolysis time, active electrode surface, interelectrode distance, and the pH of the medium have been studied to achieve higher removal efficiency. The treatment reached a maximum reduction of 99% for turbidity and 93% for chromium under the following conditions: 15 V applied potential difference, 45 cm 2 electrode surface, 1 cm interelectrode distance, pH 6.1 raw water, and a contact time of 90 min. Given the treatment efficiency obtained in this study, electrocoagulation process has the potential to be used for the cost-effective removal of wastewater pollutants.Item Removal of chemical oxygen demand from pharmaceutical wastewater by adsorption on anthracite. adsorption isotherms and thermodynamics(Cartimex, 2017) Ziati, Mounir; Hazourli, SabirItem Removal of chromium from tannery wastewater by electrosorption on carbon prepared from peach stones : effect of applied potential(2017) Ziati, Mounir; Khemmari, Fariza; Kecir, Mohamed; Hazourli, SabirThe objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at 900°C. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%