Publications Scientifiques
Permanent URI for this communityhttps://dspace.univ-boumerdes.dz/handle/123456789/10
Browse
3 results
Search Results
Item Elaboration of a new Activated Carbon derived from the Crown of Oak (ACOW) to removal the toxic Iodine: Kinetic, Isotherms modelling and Thermodynamics Study(Taylor & Francis, 2024) Aksil, Tounsia; Abbas, Moussa; Trari, MohamedThe current study aims to develop a new adsorbent material using oak crown and explore its effectiveness in removing I2 ions through a series of batch experiments. ACOW was characterised by zero charge (pHpzc) and FTIR spectroscopy. The impact of the initial I2 concentration (20-100 mg/L), temperature (25-55 °C), pH (2-14), adsorbent dosage (2-10 g/L), Stirring speed (100-900 rpm), particle size (100-2000μm) and contact time (0-30 min) on I2 adsorption was examined. The adsorption kinetic obeys the pseudo-second order model with a determination coefficient (R2) equal to 0.999. Adsorption follows the Langmuir equation well, with the best fit to the experimental data at equilibrium. A qmax value (= 103.606 mg/g) at 25°C and 120.773 mg/g at 55°C were eliminated under the optimised conditions, indicating homogeneous adsorption on the surface of the adsorbent. The thermodynamic parameters gave a negative free energy ΔGo (-3.445 to -5.629 kJ/mol), a positive enthalpy ΔHo (18.406 kJ/mol) and an activation energy Ea (= 22.599 kJ/mol), thus confirming the spontaneous and endothermic nature of adsorption of iodine on ACOW. The positive entropy ΔSo (0.0733 kJ/mol K) show increased randomness of the solid-liquid interface during the adsorption.Item Removal of toxic methyl green (Mg) in aqueous solutions by apricot stone activated carbon – equilibrium and isotherms modeling(Taylor & Francis, 2018) Abbas, Moussa; Aksil, Tounsia; Trari, MohamedApricot stone activated carbon (ASAC), was powdered, activated and to be used as effective adsor-bent to remove the dyes from aqueous solutions through batch experiments under operational factors namely, pH, contact time, adsorbent dose, initial dyes concentration and temperature. The physico-chemical, morphological and structural properties of the adsorbents were characterized by scan-ning electron microscope (SEM) and X-ray diffraction (XRD) instruments. Different kinetic modelsindicated that the adsorption is well described by the pseudo-second order model. The isotherms of methyl green (MG) adsorption on ASAC were obtained and correlated with various models. The smaller RMSE values for the Langmuir and Dubinin-Radushkevic models indicated the best fitting; the mono layer adsorption capacity of MG was found to be 148.478 mg g–1 at 21°C and 88.11 mg g–1 at 46°C at pH 10. The thermodynamic functions showed spontaneous and endothermic MG adsorption. In conclusion, the adsorbent prepared from apricot stone (ASAC) was found to very effective and suitable adsorbent for reactive dyes removal from aquatic environment, due to its simple and cheap preparation, easy availability and good adsorption capacity.Item Adsorption of the Coomassie Brilliant Blue (BBC) onto apricot stone activated carbon : kinetic and thermodynamic study(Elsevier, 2014) Kaddour, Samia; Abbas, Moussa; Aksil, Tounsia; Cherfi, Abdelhamid
