Publications Internationales

Permanent URI for this collectionhttps://dspace.univ-boumerdes.dz/handle/123456789/13

Browse

Has files: NoSubject: search.filters.subject.Isotherm

Search Results

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    Experimental and modelling study of adsorption and diffusion of hexavalent chromium in zeolitic imidazolate framework-11
    (Taylor and Francis, 2025) Lamari, Rachid; Benotmane, Bénamar; Megherbi, Hamza; Brahmi, Aghilas; Djaoui, Souad; Trari, Mohamed
    In this study, Zeolitic Imidazolate Framework-11 (ZIF-11) was successfully synthesised at room temperature and characterised by XRD, SEM/EDAX, TGA/DSC, FTIR, and CO₂ adsorption techniques. The material exhibited high crystallinity, well-defined morphology, a thermal stability up to 350 °C, low synthesis cost, and the possibility of scaling up production. Motivated by these favourable properties, ZIF-11 was investigated as an adsorbent for the removal of (Formula presented.) from aqueous solutions. Optimal adsorption conditions were found to be a pH 2, a stirring speed of 400 rpm, a contact time of 70 min and a 20 mg dose of ZIF-11 for 50 mL of (Formula presented.) solution. Thermodynamic studies indicated that the adsorption process is spontaneous and endothermic. Kinetic analysis showed that the adsorption follows the pseudo-second-order model, suggesting chemisorption as the dominant mechanism. Isotherm modelling using Langmuir and Freundlich equations confirmed a uniform distribution of (Formula presented.) species on the ZIF-11 surface. The maximum adsorption capacity of ZIF-11 was found to be 10.61 mg/g, surpassing many reported adsorbents. These findings demonstrate that ZIF-11 is a highly promising material for the (Formula presented.) removal from water. Its excellent adsorption capacity, thermal stability, and ease of synthesis highlight its potential for practical applications in water treatment and environmental remediation.
  • No Thumbnail Available
    Item
    Removal of methyl orange from aqueous solution using zeolitic imidazolate framework-11 : adsorption isotherms, kinetics and error analysis
    (Iranian Institute of Research and Development in Chemical Industries, 2023) Lamari, Rachid; Benotmane, Benamar; Mostefa, Farida
    Dyes, which are increasingly harmful to human health and ecology, are an environmental concern and their removal from wastewater is extremely required. It is also important for researchers to find relevant techniques to process these types of pollutants. This study examines the use of the synthesized imidazolate zeolite frameworks-11 (ZIF-11) by stirring method for the Methyl Orange (MO) dye removal from an aqueous solution. Scanning electron microscopy, thermogravimetry, X-ray diffraction, and Fourier transform infrared spectroscopy, were used for the analysis of ZIF-11 particles, which exhibited highly porous, irregular, and heterogeneous shapes and variable sizes. The MO removal was assessed by batch adsorption with ZIF-11 particles as adsorbent, whose efficiency was achieved at pH=8, stirring speed of 600 rpm, for a contact time of 40min, and a dosage of 800mg/L of MO solution. The thermodynamic and kinetic analysis of the MO adsorption process was achieved successfully with the pseudo-second-order kinetic model as well as Langmuir and Temkin isotherms, indicating the feasibility and spontaneity of the uniform distribution of MO molecules on the active sites of ZIF-11 particles. The calculated maximum adsorption capacity of MO on ZIF-11 particles was 178.57 mg/g, which is indicative of the potential adsorptive properties of the synthesized ZIF-11 for MO dyes
  • No Thumbnail Available
    Item
    Mass transfer processes in the adsorption of Lead (Pb2+) by apricot stone activated carbon (ASAC) : isotherms modeling and thermodynamic study
    (Springer, 2021) Abbas, Moussa
    In the present study, batch experiments were carried out to elucidate the potential of apricot stone activated carbon ASAC to remove Pb2+ ions from aqueous solution. ASAC was characterized by Bruanauer, Emmett and Teller surface area S = 80.08 (m2/g), Fourier transform infrared spectroscopy and scanning electron microscopy. The effects of various process parameters such as initial pH (2–14), adsorbent dose (5–45 g/L) initial metal ion concentration (20–0 mg/L), contact time (0–90 min), agitation speed (100–700 rpm) and temperature (298–323 k) were investigated in their respective range and their optimum conditions were ascertained. The adsorption kinetics were analyzed by the pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion kinetic models. It was found that the adsorption of the metal ions followed pseudo-second-order kinetic model. The Adsorption isotherms were modeled with Langmuir, Freundlich, Temkin, Hasley and Harkins models and their isotherm constants were calculated. The Freundlich model fits the data with a monolayer adsorption capacity of 166.813 mg/g at pH 8. The thermodynamic parameters such as the Gibbs free energy, enthalpy and entropy were calculated to predict the nature of adsorption process. The calculated thermodynamic parameters showed that the adsorption of Pb2+ ions on ASAC is endothermic (ΔH0 = 121.38 kJ/mol) and not spontaneous (ΔG0 > 0) in nature
  • No Thumbnail Available
    Item
    Removal of toxic methyl green (Mg) in aqueous solutions by apricot stone activated carbon – equilibrium and isotherms modeling
    (Taylor & Francis, 2018) Abbas, Moussa; Aksil, Tounsia; Trari, Mohamed
    Apricot stone activated carbon (ASAC), was powdered, activated and to be used as effective adsor-bent to remove the dyes from aqueous solutions through batch experiments under operational factors namely, pH, contact time, adsorbent dose, initial dyes concentration and temperature. The physico-chemical, morphological and structural properties of the adsorbents were characterized by scan-ning electron microscope (SEM) and X-ray diffraction (XRD) instruments. Different kinetic modelsindicated that the adsorption is well described by the pseudo-second order model. The isotherms of methyl green (MG) adsorption on ASAC were obtained and correlated with various models. The smaller RMSE values for the Langmuir and Dubinin-Radushkevic models indicated the best fitting; the mono layer adsorption capacity of MG was found to be 148.478 mg g–1 at 21°C and 88.11 mg g–1 at 46°C at pH 10. The thermodynamic functions showed spontaneous and endothermic MG adsorption. In conclusion, the adsorbent prepared from apricot stone (ASAC) was found to very effective and suitable adsorbent for reactive dyes removal from aquatic environment, due to its simple and cheap preparation, easy availability and good adsorption capacity.