Publications Internationales
Permanent URI for this collectionhttps://dspace.univ-boumerdes.dz/handle/123456789/13
Browse
14 results
Search Results
Item Improving kernel PCA-based algorithm for fault detection in nonlinear industrial process through fractal dimension(Institution of Chemical Engineers, 2023) Kaib, Mohammed Tahar Habib; Kouadri, Abdelmalek; Harkat, Mohamed Faouzi; Bensmail, Abderazak; Mansouri, MajdiPrincipal Component Analysis (PCA) is a widely used technique for fault detection and diagnosis. PCA works well when the data set has linear characteristics. However, most industrial processes have nonlinear characteristics in their data. Kernel PCA (KPCA) is an alternative solution for such types of data sets. This solution doesn’t come without a cost since one of KPCA’s disadvantages is a large number of observations which results in more occupied storage space and more execution time than the PCA technique. Furthermore, if the data is too large it may minimize the monitoring performance of the KPCA model. Reduced KPCA (RKPCA) is a solution for the conventional KPCA limitations. Firstly, RKPCA can deal with nonlinear characteristics without crucial problems because it is based on the KPCA algorithm with a data reduction part where it keeps most of the data’s infor- mation. Thus, by reducing the number of observations RKPCA reduces the occupied storage space and execution time while preserving tolerable monitoring performance. The proposed RKPCA algorithm consists of two parts. First, the large-sized training data set is reduced using the fractal dimension technique (correlation dimension). Afterward, the KPCA model is developed through the obtained reduced training data set. The proposed scheme is applied to the Tennessee Eastman Process and the Cement Plant Rotary Kiln data sets to evaluate its performance in comparison with other algorithms.Item Enhancing fault diagnosis of undesirable events in oil & gas systems: A machine learning approach with new criteria for stability analysis and classification accuracy(SAGE, 2023) Sahraoui, Mohammed Amine; Rahmoune, Chemseddine; Zair, Mohamed; Gougam, Fawzi; Damou, AliPetroleum serves as a cornerstone of global energy supply, underpinning economic development. Consequently, the effective detection of faults in oil and gas (O&G) wells is of paramount importance. In response to the limitations observed in prior research, this study presents an innovative fault diagnosis system, rooted in machine learning techniques. Our approach encompasses a comprehensive analysis, incorporating stability assessment via standard deviation (STD), and a meticulous evaluation of accuracy and stability for distinct fault scenarios. By integrating data preprocessing, feature selection methods, and deploying a robust random forest classifier, our model achieves a substantial enhancement in fault classification accuracy and stability. Extensive experimentation substantiates the superiority of our approach, surpassing the performance of previous studies that predominantly emphasized overall accuracy while disregarding stability analysis. Notably, our model attains remarkable accuracies, notably achieving a flawless 100% accuracy for scenario 3 faults. Detailed examination of mean accuracies and STDs further reinforces the precision and consistency of our model's predictive capabilities. Additionally, a qualitative assessment underscores the practical utility and reliability of our model in accurately identifying critical fault types. This research significantly advances fault detection methodologies within the O&G industry, providing valuable insights for decision-making systems in oil well operations.Item New reduced kernel PCA for fault detection and diagnosis in cement rotary kiln(Elsevier, 2020) Bencheikh, Fares; Harkat, M. F.; Kouadri, A.; Bensmail, A.Fault detection and diagnosis (FDD) based on data-driven techniques play a crucial role in industrial process monitoring. It intends to promptly detect and identify abnormalities and enhance the reliability and safety of the processes. Kernel Principal Component Analysis (KPCA) is a powerful FDD based data-driven method. It has gained much interest due to its ability in monitoring nonlinear systems. However, KPCA suffers from high computing time and large storage space when a large-sized training dataset is used. So, extracting and selecting the more relevant observations could provide a good solution to high computation time and memory re- quirements costs. In this paper, a new Reduced KPCA (RKPCA) approach is developed to address that issue. It aims to preserve one representative observation for each similar and selected Euclidean distance between training samples. Afterwards, the obtained reduced training dataset is used to build a KPCA model for FDD purposes. The developed RKPCA scheme is tested and evaluated across a numerical example and an actual involuntary process fault and various simulated sensor faults in a cement plant. The obtained results show high monitoring perfor- mance with highest robustness to false alarms and maximum fault detection sensitivity compared to conventional PCA, KPCA and other well-established RKPCA techniques. Furthermore, the unified contribution plot method demonstrates superior potentials in identifying faulty variables.Item Shading fault detection in a grid-connected PV system using vertices principal component analysis(Elsevier, 2021) Rouani, Lahcene; Harkat, Mohamed Faouzi; Kouadri, Abdelmalek; Mekhilef, SaadPartial shading severely impacts the performance of the photovoltaic (PV) system by causing power losses and creating hotspots across the shaded cells or modules. Proper detection of shading faults serves not only in harvesting the desired power from the PV system, which helps to make solar power a reliable renewable source, but also helps promote solar versus other fossil fuel electricity-generation options that prevent making climate change targets (e.g. 2015’s Paris Agreement) achievable. This work focuses primarily on detecting partial shading faults using the vertices principal component analysis (VPCA), a data-driven method that combines the simplicity of its linear model and the ability to consider the uncertainties of the different measurements of a PV system in an interval format. Data from a gridconnected monocrystalline PV array, installed on the rooftop of the Power Electronics and Renewable Energy Research Laboratory (PEARL), University of Malaya, Malaysia, have been used to train the VPCA model. To prove the effectiveness of this VPCA method, four partial shading patterns have been created. The obtained performance has, then, been tested against a regular PCA. In addition to its ability to acknowledge the uncertainty of a PV system, the VPCA method has shown an enhanced performance of detecting partial shading fault in comparison with the standard PCA. Also, included in the article is an extension of the contribution plot diagnosis-based method, of the Q-statistic, to the interval-valued case aiming to pinpoint the out-of-control variables.Item Gearboxes fault detection under operation varying condition based on MODWPT, Ant colony optimization algorithm and Random Forest classifier(SAGE Publications, 2021) Ikhlef, Boualem; Rahmoune, Chemseddine; Bettahar, Toufik; Benazzouz, DjamelGearboxes are massively utilized in nowadays industries due to their huge importance in power transmission; hence, their defects can heavily affect the machines performance. Therefore, many researchers are working on gearboxes fault detection and classification. However, most of the works are carried out under constant speed conditions, while gears usually operate under varying speed and torque conditions, making the task more challenging. In this paper, we propose a new method for gearboxes condition monitoring that is efficiently able to reveal the fault from the vibration signatures under varying operating condition. First, the vibration signal is processed with the Maximal Overlap Discrete Wavelet Packet Transform (MODWPT) to extract the AM-FM modes. Next, time domain features are calculated from each mode. Then the features set are reduced using the Ant colony optimization algorithm (ACO) by removing the redundant and unimportant parameters that may mislead the classification. Finally, an ensemble learning algorithm Random Forest (RF) is used to train a model able to classify the fault based on the selected features. The innovative aspect about this method is that, unlike other existing methods, ACO is able to optimize not only the features but also the parameters of the classifier in order to obtain the highest classification accuracy. The proposed method was tested on varying operating condition real dataset consisting of six different gearboxes. In the aim to prove the performance of our method, it had been compared to other conventional methods. The obtained results indicate its robustness, and its accuracy stability to handle the varying operating condition issue in gearboxes fault detection and classification with high efficiencyItem A modified moving window dynamic PCA with fuzzy logic filter and application to fault detection(Elsevier, 2018) Ammiche, Mustapha; Kouadri, Abdelmalek; Bensmail, AbderazakItem A statistical procedure based on wavelets for fault detection applied on the three tank system(Taylor & Francis, 2010) Kouadri, Abdelmalek; Zelmat, MimounItem An improved plant-wide fault detection scheme based on PCA and adaptive threshold for reliable process monitoring : application on the new revised model of Tennessee Eastman process(Wiley, 2017) Bakdi, Azzeddine; Kouadri, AbdelmalekItem Fault detection and diagnosis in a cement rotary kiln using PCA with EWMA-based adaptive threshold monitoring scheme(Elsevier, 2017) Bakdi, Azzeddine; Kouadri, Abdelmalek; Bensmail, AbderazakItem Application of data communication to the detection and correction of power system faults(2017) Recioui, Abdelmadjid; Lograda, M.; Chettah, K.Data communication is an important part in modern industrial processes and is necessary in automation, monitoring, and protection purposes. This paper aims at designing a real time communication between two computers for interchanging the state of a three phase circuit to emulate a transmission line protection system in power substation. The circuit designed in Proteus ISIS is based on “symmetrical component theory” and the algorithm for exchanging data between two computers is built using TCP/IP protocol in LABVIEW environment. The application consists of monitoring and controlling three phase lines by sending the data collected to one of the computers and sending the commands back to trip relays if any fault is detected. The purpose is to prevent the propagation of this fault and to connect other sources to maintain the flow of power to the load