Publications Internationales

Permanent URI for this collectionhttps://dspace.univ-boumerdes.dz/handle/123456789/13

Browse

Subject: search.filters.subject.Shear rate

Search Results

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    Rheological behavior of Algerian crude oil: effect of temperature and refined product
    (Taylor and Francis Online, 2018) Souas, Farid; Safri, Abdelhamid; Benmounah, Abdelbaki; Djemiat, Djamal Eddine
    The rheological behavior and its variation with temperature and refined product concentration of a crude oil sample coming from a quagmire of the separation station of Tin Fouye Tabankort oilfield/southern Algeria were investigated experimentally. The experiments were carried out at various temperatures (20, 30 and 50 °C) over the shear rate range of 0 to 700 s−1 by using a controlled stress rheometer (AR 2000, TA Instrument). The results showed that the crude oil exhibit non-Newtonian of shear thinning behavior at low shear rate and Newtonian behavior at high shear rate and was adequately described by Casson and Herschel–Bulkley models. The rheological measurements through the steady flow test and viscoelastic behavior, including the storage modulus (G′), loss modulus (G″), and complex modulus (G*), has indicated that the rheological properties of the crude oil were greatly influenced by the temperature and the additive concentration.
  • No Thumbnail Available
    Item
    Experimental investigation of the rheological behavior of algerian crude oils from the quagmires
    (Taylor & Francis, 2019) Souas, Farid; Safri, Abdelhamid; Benmounah, Abdelbaki
  • No Thumbnail Available
    Item
    FTIR analysis and rheological behavior of bisphenol : a diglycidyl ether resin filled Fume-Silica
    (2014) Irekti, Amar; Bezzazi, Boudjema; Boualam, Chahrazed; Aribi, Chouaib; Dilmi, Hamid
    Silica-fume as fillers into polymers materials affect significantly the physical, mechanical and the electrical properties of the polymers. The polymer that we studied here is an epoxy based resin (STR) and silica fume (FS). This paper presents the dependency of the rheological behavior of the STR epoxy resin on the FS content within a temperature at which the reaction thermoset is neglected. We used a cone-plate viscometer for the study of the rheological behavior, and a scanning electron microscope is used for the analysis of the dispersion state of the FS in STR epoxy resin. Compared to the control without loads, an increase of 50% of the shear stress and the plastic viscosity were recorded for the composite. The software Rheowine viscometer enabled us to model and identified the rheological behavior of these mixtures with resin. The results obtained in this modeling, confirmed that the resin mixtures have shear-thinning rheological behavior, this last give us the model of Ostwald de Waele
  • No Thumbnail Available
    Item
    Rheological behavior of the epoxy resin loaded with the pozzolan
    (2012) Irekti, Amar; Hami, Brahim; Aribi, C.; Bezzazi, B.; Briki, I.
    The study is to synthesize composite materials with news formul ations of thermosetting matrices by the incorporation of 40% of mineral fillers to reduce the cost of composite materials an d to improve implementation by increasing the viscosity and redu cing the withdrawal to its minimum value. The mineral filler increases si gnificantly in rheological parameters, whatever it nature of th e mineral filler. Compared to the control without charges, an increase of 60% of the shear stress and that of plastic viscosity were reco rded for the epoxy resin. The software Rheowine viscometer enabled us to m odel and identified the rheological behavior of these mixtures wit h resin. The results obtained in this modeling, confirmed that th e resin mixtures have shear-thinn ing rheological behavior, this last allows the model of the Ostwald de Waele